Extreme Flight RC is proud to present to you our Torque line of brushless outrunner motors.  Torque motors are among the most powerful and efficient outrunner motors currently availa bl e.  Each Torque Outrunner includes a radial mount, prop adapter and pre-soldered bullet connectors at no additional cost, making the Torque motors an excellent value.   If you want some serious power for your next project, choose a Torque! You'll also want to check out our matched Airboss Series speed controllers.

The Torque Revolution 4014-T570 brushless outrunner is a 5S powerhouse!  Capable of 80A burst current while maintaining very acceptable temperature, the Torque Revolution will revolutionize .40-.60 sized electric aircraft conversions.

CHECK OUT THE NEW E-ZONE REVIEW HERE 

Recommended setups:

Sport flying - .40-.50 sized warbirds and pattern aircraft.  .40-.60-sized trainers and sport planes.  Use on 4S 3700-5000mah 20C cells w/ 13x10, 14x10, 15x8 for good power similar to glow.  Use on 5S 3400-4400 20C or 5S 4200-5000 15Cw/ 12x10, 13x10, 12x12 for excellent power with unlimited vertical and high speed. 

3D Flying - For .40-.60 sized 3D aircraft.  Use with 4S 3700-5000mah20C and 16x8 for approx 850-900W at 60-65A.  Use with 5S 3400-3700 20C and APC E 14x7 or XOAR wood 14x7 for 1100W at approx 60-65A.  Use with 5S 3850-5000 20-25C and APC 15x7 E or XOAR 15X8E for 1250-1400W at approx 75-80A (ALWAYS verify current draw with your own measuring equipment on your battery packs.  Prop down in diameter as necessary to achieve desired amp draw.)  75-80A setup recommended only for 3D flight where full throttle is used in bursts, not sustained for the entire flight.